Selecting Wpapsk/Wpa2Psk Security Mode - Toshiba GN-1060 Operator's Manual

1 SETTING UP WIRELESS NETWORK
 Selecting WPAPSK/WPA2PSK security mode
The WPAPSK/WPA2PSK is an authentication method using the PSK (Pre-Shared Key) between the Access
Point and other wireless devices.
To access the wireless network using the WPAPSK/WPA2PSK authentication, the same PSK Path Phrase
must be assigned in both the Access Point and other wireless devices. If the PSKs are same between the
Access Point and other wireless devices, the Access Point allows them to access the wireless network
through the Access Point.
1 Press [WPAPSK] or [WPA2PSK] and press [NEXT].
The WIRELESS ENCRYPTION WPAPSK/WPA2PSK screen is displayed.
Enter the following items and press [NEXT].
2
 WIRELESS ENCRYPTION TYPE
Select the encryption type for the PSK.
[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a
message integrity check. This key will be changed for every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography
algorithm that the U.S. government improves to replace the DES and 3DES.
 [PSK PASS PHRASE]
Press this to enter the PSK Pass Phrase. The PSK is created by using the this pass phrase. You must
enter the same pass phrase that is set in the Access Point. The PSK Pass Phrase must be between 8
to 63 characters long.
When pressing [PSK PASS PHRASE], the letter entry screen is displayed. Enter the value using the
keyboard and digital keys, and press [OK] to set the entry.
26 Setting Up the Infrastructure Mode