Using The Tuner - JVC RD-T5BU Instructions Manual

I I

Using the Tuner

SNOOZE
SLEEP
/DIMMER STANDBY/ON
1 2 3
4 5 6
Number keys
7 8 9
10 +10
REPEAT
TUNER CD
BAND
TUNER BAND
FM MODE
4
BASS/TREBLE AHB PRO
VOLUME
REMOTE CONTROL RM-SRDT7
[RD-T7GN Only]
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
Setting the AM Tuner Interval
Spacing ——————————————
When shipped, the AM tuner interval is set to 9 kHz spacing. You
can change it to 10 kHz spacing.
To select 10 kHz intervals, while holding down the ¢ button
on the Unit in Standby mode, press the
on the power (at the same time, the 100 kHz spacing is selected for
FM broadcast).
To select 9 kHz intervals again, while holding down the 4
button on the Unit in Standby mode, press the
to turn on the power.
[10 kHz Intervals]
STANDBY/ON
STANDBY
Note: When you change the setting, the preset stations are erased.
You will need to preset the stations again. (See page 6.)
One Touch Radio (AC power only) —
Just press the TUNER BAND button to turn on the Unit and start
playing the station you were last tuned to.
I
You can also switch from the CD Player to the radio by pressing
the TUNER BAND button.
Tuning In a Station
I
1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
Each time you press the button, the band changes as follows:
FM AUTO FM MONO
5
STANDBY/ON
STANDBY
CLOCK/DISPLAY
CD/TUNER
SNOOZE/DIMMER
¢
Band display, Frequency display, Preset channel
%
button on the Unit to turn
%
button on the Unit
[9 kHz Intervals]
STANDBY/ON
STANDBY
AM
CD PORTABLE SYSTEM
CLOCK/
DISPLAY SLEEP
TIMER
ALARM
(Display when using the Tuner)
I
2. Select a station using one of the following
methods.
I
Manual Tuning
4 ¢
Press the or
to frequency until you find the station you want.
P.TUNING
I
Auto Tuning
If you press and hold the
more, the frequency changes down, or up, automatically until a
station is found.
I
Preset Tuning using the Unit (Possible only after pre-
setting stations)
Press the 7 P.TUNING button to select the preset station.
After you have selected the preset number, the band and the fre-
quency are displayed.
Example:Press the 7 P.TUNING button until the preset
•
number 12 "P- 12" appears.
I
Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the station by entering its preset number on the number
keys.
• Example:For channel 5, press 5. For channel 15, press +10
then 5. For channel 25, press +10 twice, then 5.
For channel 30, press +10 twice, then 10.
• The band and the frequency are displayed.
I
3. Turn the antenna for best reception.
• For FM broadcast, extend the built-in wire antenna.
• For AM broadcast, turn the Unit itself.
For FM
MULTIJOG
VOLUME
RANDOM/ BASS/
AHB PRO REPEAT TREBLE
I
P.TUNING
¢
4
P.TUNING
CD TUNER BAND
TUNER BAND
button repeatedly to move from frequency
or
OR
4 ¢
or button for one second or
OR
OR
For AM