Table of Contents
Advertisement
Tuner Operation
You can listen to FM and AM stations by tuning in manually, au-
tomatically, or using preset memory.
For best reception, extend the headphone cord (FM antenna) for
FM and turn the unit for AM.
Setting the AM frequency interval
(except the U.S.A. and Canada)
When shipped, the AM freguency interval is set to 9 kHz.
You can change it to 10 kHz to suit to your country.
When you change it, always remove the AC adaptor and the bat-
teries from the unit beforehand.
9K
10K
9 k : 9 kHz interval
10 k :10 kHz interval
7
Manual/Auto tuning
1
Select FM or AM.
FM/AM
(Repeatedly)
2
Select a station.
Manual tuning
Press ¢ or 4 repeatedly to select a station you want.
Auto tuning
Hold down ¢ or 4 for a while and then release it. The fre-
quency automatically changes up or down to find the next station.
Preset tuning
Preset the stations beforehand.
(See "Presetting stations".)
1
Select FM or AM.
FM/AM
(Repeatedly)
2
Select the preset number you want.
PRESET
PRESET
DOWN
UP
(Repeatedly)
Preset number
Presetting stations
You can preset up to 20 FM stations (frequencies) and 10 AM sta-
tions (frequencies).
1
Select the station you want to preset.
Use Manual or Auto tuning mentioned earlier.
2
Press PROGRAM.
3
Select the preset number you want.
FM : 01~20
AM : 01~10
PRESET
PRESET
DOWN
UP
4
Press PROGRAM.
Changing the FM reception mode
When a broadcast is in stereo, "ST." lights up and you can hear
stereo effects. However, if an FM stereo broadcast is hard to re-
ceive or noisy, you can select monaural (MONO) mode. Reception
improves, but you lose the stereo effect.
To select the monaural mode
"MONO" appears.
MODE/
FM MODE
To restore the stereo mode
Press MODE/FM MODE once again. "MONO" will go out.
Notes:
The following operation will also restore the stereo mode.
• Pressing FM/AM
• Pressing 4, ¢, PRESET UP, or PRESET DOWN
• Pressing 6
• Turning off the unit
Preset station
Turning off the unit
Preset number
Advertisement
Table of Contents
