Remote Control - Pioneer XC-F10 Service Manual

XC-F10
About the automatic door open/close
feature
The automatic opening of the disc compartment
works using an infrared sensor. It may not work
reliably if:
• the sensor is exposed to direct sunlight
• the room is lit using fluorescent lights
• the unit is on a dark-colored surface
• the unit is placed adjacent to a wall or other
surface
Approximate tansmitter
range
40
15cm
20
Door open sensor
See Operating instructions if you want to turn this
feature off completely and just use OPEN/CLOSE
buttons on the remote or top panel.

Remote control

OPEN/CLOSE
1
CD CD-R
CD TUNER
3
DIRECT PLAY 3
CD-R MD
5
1 ¡
7
7
SET
STANDBY/ON
9
CANCEL
11
42
VOLUME
2
AUX
SOUND
4
TAPE TIMER
4 ¢
6
CD-R
8
MENU DISP
SYSTEM
10
MENU DISP
CHARA
1 OPEN/CLOSE buttons – Press to open/close
the disc compartment of the CD player and
optional CD-Recorder.
2 VOLUME buttons – Use to adjust the volume.
3 Direct Play buttons – Press to switch to CD,
tuner, tape, MD, CD-R or AUX (auxilliary). If the
system is in standby, the power is also switched
on. For CD, tape, MD and CD-R, playback will
start if there's a CD/tape/MD loaded. This
system can't control a component connected to
the auxiliary inputs.
4 SOUND – Press to select bass, treble, balance
or sub-woofer level (use the + and – buttons to
adjust the level).
TIMER – Press to access the timer menu for
setting the wake-up, sleep and record timers.
5 1 ¡ – Press to scan backwards/forwards
on the CD/tape/MD currently playing.
6 – + (4 ¢) – Use to switch between menu
options; adjust the sound; change the preset
station number when listening to the tuner; or
skip tracks on the currently playing CD/tape/
MD.
7 7 – Press to stop the currently playing CD/tape/
MD.
8 CD-R control
MENU – Press to access the menu for the
optional CD-Recorder.
DISP – Press to change the disc information
shown in the optional CD-R's display.
9 (STANDBY/ON) – Press to switch the system
on or into standby.
10 SYSTEM control
MENU – Press to access the menu.
DISP/CHARA – Press to change the displayed
information (this varies according to the current
function).
11 SET – Press to make a setting when using the
menu system.
CANCEL – Press to escape from within a
menu.