Pioneer XC-F10 Service Manual page 30

XC-F10
6.1.2 Function And Operation In CD Test Mode
Single goods CD
Main body key
remote control unit
OPEN/CLOSE
STOP
POWER (∗1) RANDOM (A24A)
PLAY/PAUSE
PLAY/PAUSE PLAY (A217)
PLAY/PAUSE PLAY (A217)
PAUSE (A218)
VOL UP
TRK UP (A210)
TRK DOWN (A211)
VOL DOWN
(None) (∗3) PGM (A20D)
∗1 Method of making POWER OFF when there is no remote control.
The function is changed besides CD keeping pushing the STOP key again for two seconds after CD is stopped with the STOP key.
And, please push the POWER key.
∗2 If the slider is not sent to outer a little to turn on the servo by surroundings the in DISC, the sound is not occasionally emitted.
∗3 It is possible to operate only by remote control for the unit check mode.
STANDBY/ON
30
Operation
condition
(None) When CD STOP
When CD STOP
STOP
When Servo ON
When CD STOP
PLAY
After FOK
(A217)
When TRK SERVO
OFF
When TRK SERVO
ON
When TRK SERVO
ON
When TRK SERVO
ON
When CD has
Stopped
PLAY/PAUSE
STOP
VOL. +
VOL. –
Content of operation
The CD tray opens and close.
The function is changed.
All servos are turned off.
LD is turned on, and auto focus is done.
The spindle is kicked. And, the self adjustment
processing tracking servo is turned on and MUTE is
released. (∗2)
The tracking servo is turned on, and MUTE is
released.
The tracking servo is turned off, and MUTE is put.
The tracking servo is turned off, MUTE is put, and
the slider is moved in the direction of FWD.
The tracking servo is turned off, MUTE is put, and
the slider is moved in the direction of RVS.
LDON → Auto focus → Spindle kick →
Self adjustment → TOC lead → The 2th search →
Tracking servo ON → MUTE release
OPEN/CLOSE
FL display
CD :
FOCUS ON
SPNDL KICK
↓
SERVO ON
SERVO ON
SERVO OFF
CD XX : XX
↓
SERVO OFF
CD XX : XX
↓
SERVO OFF
FOCUS ON
↓
SPNDL KICK
↓
SERVO ON