Usb Charger - Asus Maximus VII Formula Series Manual

USB Charger+

USB Charger+ allows you to quick-charge your portable USB devices even if your computer
is off, in sleep mode, or in hibernate mode.
Before using USB Charger+, ensure to disable the ErP Ready item in the BIOS. To do
this, go to Advanced > APM > ErP Ready in the Advanced mode then set this item to
[Disabled].
USB Charger+ is available only in selected motherboard models.
Launching USB Charger+
To launch USB Charger+, click or tap
menu, then select USB Charger+.
Using USB Charger+
Ensure to connect your USB device into the USB port that supports this utility. Refer to the
Rear I/O connection section of this user guide for more details.
•
•
4-18
Click or tap to select the type of USB device
that you wish to charge when the system is off
USB Charger+ does not support USB hubs, USB extension cables, and generic USB
cables.
USB Charger+ may not recognize some ASUS devices due to varying design.
on the top-right corner of the AI Suite 3 main
Chapter 4: Software support
Click or tap to
refresh the list
Click or tap to
apply the settings
Click or tap to
discard the settings