Idle Speed Adjusting Screw; Shift Lever - KTM 450 SX-F EU Owner's Manual

6 CONTROLS
6.13

Idle speed adjusting screw

6.14

Shift lever

The idle setting of the throttle valve body has a big influence on the starting behavior,
stable idling and the response to throttle opening. This means that an engine with a
correctly set idle speed is easier to start than if the idle is set wrongly.
The idle speed is adjusted with idle speed adjusting screw
Turning the adjusting screw clockwise increases the idle speed.
Turning the adjusting screw counterclockwise lowers the idle speed.
C00245-10
Shift lever
1
601839-12
(All USA models, SX‑F Factory Edition)
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
601839-10
(450 SX‑F EU)
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
C00221-10
is mounted on the left side of the engine.
15
.
1