Filling/Bleeding The Cooling System - KTM 2011 990 Supermoto T USA Owner's Manual

COOLING SYSTEM

Filling/bleeding the cooling system

14.5
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
–
Place a suitable container under the engine.
–
Remove screw
–
Completely drain the coolant.
–
Mount screw
Guideline
Screw, water pump cover
B00676-11
x
–
Reset the fuel tank. (
–
Ensure that the drain plug on the radiator and the water pump cover are tightened.
–
Remove bleeder screw
700629-10
.

with a new seal ring and tighten it.

p. 85)
.

M6 10 Nm (7.4 lbf ft)
158