Troubleshooting - JVC Network Pack SA-DV6000 User Manual

Network pack
Hide thumbs Also See for Network Pack SA-DV6000:
Table of Contents

Advertisement

Others
When there is a system error, network error, unit malfunction, etc., SA-DV6000 displays the error on the BR-DV6000 LCD screen.
<LCD screen or viewfinder screen>
Screen display
<File system related>
CF REMAIN 60SEC!
(Flashing for 3 sec.)
CF REMAIN 30SEC!
CF REMAIN 20SEC!
CF REMAIN 10SEC!
CF FULL!
(Displayed until CF recording
stops)
CF FULL!
(Flashing for 3 sec.)
FORMAT ERROR!
NO CF FORMAT!
(Flashing)
TIME CODE ERROR!
IN POINT NOT SET!
IN/OUT POINT NOT SET!
CAPTURE STOP!
WAIT A MINUTE, PLEASE!
FILE NO REGISTRATION!
FILE SEND ERROR!!
ACTION ESCAPE!!
CUE UP
REC
Cause
Remaining time became less than 60
seconds during recording to CF memory
card.
Remaining time became less than 30
seconds during recording to CF memory
card.
Remaining time became less than 20
seconds during recording to CF memory
card.
Remaining time became less than 10
seconds during recording to CF memory
card.
Remaining time has run out during
recording to CF memory card.
Recording is being attempted on CF
memory card with remaining time of less
than 10 seconds.
Failed to format CF memory card.
CF memory card is unformatted, or an
unknown format is being used.
Attempted to set the same value for IN
POINT and OUT POINT.
IN POINT has not been set.
Both IN POINT and OUT POINT have
not been set.
STOP button was pressed during
capturing.
Clips on the CF card are being trans-
ferred to a server.
File to transfer has not been selected.
File transfer was unsuccessful.
Operation was canceled.
Specified range of the DV tape is being
recorded.
Warning display
Stop recording and replace with a new
CF memory card, or delete files on the
current CF memory card to secure
recording space.
Check the CF memory card and format
again. If the card still cannot be format-
ted, contact your nearest JVC-authorized
service agent.
Check the CF memory card and format.
Set the OUT POINT at least 5 seconds
from IN POINT.
Wait until the display disappears.
Check the FTP CLIENT SETUP setting
or the used network environment.
65

Troubleshooting

Remedy
Reference
page
33
32
32
36
36
36
45
46
46
45
46
36
36
→ OVER

Advertisement

Table of Contents
loading

Table of Contents