Network Setup Page - JVC Network Pack SA-DV6000 User Manual

Network remote control
Clicking NETWORK SETUP on the left of the Streamcorder screen displays the NETWORK SETUP screen for performing network
related settings.
Screen selection
Contact your network administrator for any unclear points concerning network settings.
Item Setting
Address Setup MANUAL
DHCP
IP Address
Subnet Mask
Default Gateway
Host Name
Domain Name
DNS Server
FTP Client
FTP Server
Account
AD-HOC MODE IBSS
AHDM
OFF
WLAN Channel 1 CH
:
10 CH
:
14 CH
ESS-ID
WEP 64 Bit
128 Bit
OFF
WEP Key
LEAP ON
OFF
LEAP Server
Accout
Caution
If the IP address is changed in the Streamcorder screen, the unit will automatically jump to the new IP address. However, the
screen may not be displayed correctly depending on the environment. In this case, access by specifying the new IP address using
7.
a browser. ( operation
The address setting mode can be selected.
MANUAL : Select for MANUAL mode.
DHCP : Select for DHCP mode.
The IP address can be set.
The subnet mask can be set.
The gateway address can be set.
The host name can be set. (Max: 63 alphanumerical characters)
The domain name can be entered. (Max: 63 alphanumerical characters)
The address of the domain name system server can be set.
When SETUP is selected, the FTP CLIENT SETUP screen appears.
( page 50)
When selecting Change, settings can be made in the FTP Server
Account Setup screen. ( page 51)
The AD-HOC mode can be set.
● WLAN Channel can be set.
● Select the region of use using the COUNTRY setting.
USA: U.S., EU: Europe, FRN: France,
SPN: Spain, JPN: Japan
When selecting Change, settings can be made in the ESS-ID Setup
screen. (Max: 32 alphanumerical characters) ( page 51)
WEP is set.
When selecting Change, settings can be made in the WEP Key Setup
screen. ( page 51)
When set to ON, LEAP Server Account can be set.
When Change is selected, settings can be made in the LEAP Server
Account Setup screen. ( page 51)
on pages 47)
Description
49

NETWORK SETUP page

* At the present, there
will be influence on the
operation when setting
the Domain Name or
DNS Server.
Clicking the OK icon
will confirm the inputted
setting.
Factory setting
MANUAL
192.168.100.101
255.255.255.000
192.168.100.254
none
none*
0.0.0.0*
OFF
10 CH
OFF
OFF