Wired Lan; Wired Connection, Single Vtr To Single Client Pc - JVC Network Pack SA-DV6000 User Manual

LAN connections
The SA-DV6000 supports wired LAN connections to client computers either locally, through an intranet or over the internet. Connecting
multiple VTR to a Client PC, or multiple Client PC to a VTR is supported. In addition, it is possible for a client to remotely control the VTR
as well.
A list of LAN card currently supported by the SA-DV6000 is shown on Page 4. Any compatible LAN card can be used in the Client PC.
For LAN card settings on the Client PC side, see the instruction manual of the Client PC or LAN card.
\ Wired Connections, Single VTR to Single Client PC
OPERATE
MENU DISP RESET A.DUB REC PLAY PAUSE
Mini
PROFESSIONAL
SEARCH– SET SEARCH+
EJECT REW STOP FF
MIC
HOLD BLANK CUE UP
PHONES REC LEVEL AUDIO INPUT
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL L CH-1/2 DV
TC MIX MIX LINE
UB R CH-3/4 Y/C
CH-1/3 CH-2/4 BR-DV6000
(CPN) LOCAL
DHCP OFF
IP ADDRESS 192. 168. 100. 101
SUBNET MASK 255. 255. 255. 000
NOTE:
Refer to the appropriate manual for setting the LAN card or Client PC
Perform the following settings for the above configuration.
● DHCP should be OFF
2
● VTR and Client PC are set the same domain and different IP addresses.
● The Netmask of both the VTR and computer must be the same
● A CAT-5 cross cable is used between the VTR and computer
● Set the network connection of the Client PC to use no proxy server. Please refer to Page 27 for information regarding this setting if
troubles are encountered.
2
In case the connecting Client PC is not a server equipped with a DHCP feature.
10/100 BASE-T cross cable
Set a unique number to avoid doubling
PROXY SERVER NO USE
DHCP SERVER NO USE
IP ADDRESS 192. 168. 100. 100
SUBNET MASK 255. 255. 255. 000
Set the same domain
* For the PC settings when using a LAN card,
refer to the instruction manual included with
the LAN card.
* Up to 10 clients can access at the same
time.
20

Wired LAN