Using Lan Terminal - JVC Network Pack SA-DV6000 User Manual

Basic
Other than the use of a LAN card, this unit is also equipped with a LAN terminal for LAN connection.
LAN cable types
● When connecting directly to a PC, use a 10/100 BASE-T cross cable.
● When connecting to a network hub, use a 10/100 BASE-T straight cable.
Connecting to the LAN terminal
Completely insert the connector of the LAN cable.
Caution
● Do not remove the LAN cable when the Link LED is on. For a short time, menus cannot be opened.
● Do not connect/disconnect the LAN cable when recording to a CF memory card.
● Do not mount a LAN card when the Link LED is on.
Link LED
The Link LED will light when connected to a network using the LAN terminal.
When mounted with a LAN card, the Link LED will not light.
When using both LAN card and LAN terminal
When mounted with a LAN card, the LAN card will be given priority for LAN connection. In this case, communication via the LAN
terminal is not possible.
Memo
When mounted with a CF memory card, the following can be performed:
● Transferring of a clip recorded on a CF memory card to a server via the LAN terminal.
VIDEO COMPONENT REMOTE2
LINE
Y/C
IN IN
R-Y B-Y
Y
AUDIO
OUT
CH 1/3 CH 2/4
OUT
IN
OUT
MONITOR
IN OUT
OUT
SYNC IN TIME CODE
IN OUT
OFF
REC PLAY
DV
MONITOR
SERIAL TIMER
SIGNAL
IN/OUT OUT
DC12V REMOTE
GND
Link LED
LAN
REMOTE1
LAN cable
LAN terminal
5

Using LAN terminal