Troubleshooting; Disposal - Samsung ViasatHD DSB-H670N User Manual

You can download and upgrade the system software of the receiver through a specific channel
through a specific channel designated by the broadcaster. The Distributor will provide you with more
information about that.
Problem
No display LED on
the front panel;
No power supply
No pictures on the screen
No sound
Remote Control does not
operate directly
Poor picture quality
signal strength in
On-Screen Error Messages: Antenna cable not connected
"No signal"
Note Note
: Bad weather can cause poor signal strength.
There might be a difference in output mode video image quality or video format
depending on TV Brand.

Disposal

The device, packaging material (e.g. Styrofoam) and the batteries must never be disposed of with
household refuse. Please obtain appropriate information about the regulations in your community
and dispose of all refuse in accordance with regulations at the separate locations provided.

TROUBLESHOOTING

Possible cause
Power cord
not plugged in correctly
Receiver in Standby mode;
SCART cable is not connected
to video output of television;
incorrect channel or video
output selected on television
SCART or Audio cable connected
incorrectly;
Volume level = 0;
Muting active
Incorrect operation;
Batteries dead or inserted
incorrectly
TV mode was selected
Signal strength too low
or not tight;
incorrect position of the antenna
Receiver not yet set
32
Solution of the problem
Power cord plug in correctly
Set receiver to "On";
Check connection;
Check channel and video output
(TV instruction manual)
Check connection;
Increase Volume on television set;
Press the MUTE key
Point remote control
towards the Receiver.
Replace batteries or insert correctly
Press 'Viasat' Key on remote control
Check all wire connections
Check connection and correct;
Check position and correct antenna;
Check the signal strength in
the "Installation Setup" menu
Scanning of in "Installation" menu
D I G I T A L S A T E L L I T