ViewSonic VT2730-1M Service Manual page 50

VT2730-M LCD TV DDC Card PC
RS-232 Cable VGA Cable Barcode Reader
5.5.2 Setup Procedure
1. Connect VGA Card and DDC Card with RS-232 cable.
2. Barcode Reader connects with keyboard and PC keyboard port.
3. Connect DDC Card and VT2730-M LCD TV with VGA Cable.
(when key in DVI DDC information, use VGA transform to DVI port )
4. Connect Power Cord to VT2730-M LCD TV.
5. Press 'MENU'and 'ENTER' at the same time, then go into the BURN IN MODE.
49
ViewSonic Corporation
Confidential - Do Not Copy VT2730-1M