ViewSonic VT2730-1M Service Manual page 17

Operation
Storing Channels into Memory
1. Press the MENU button to display the OSD main menu.
press ENTER
enter.
perform Auto Scan function.
To stop scanning, press MENU at any time.
5. The Auto Scan screen will be shown, and after it is
Viewing the Menus
1. Press the MENU button to display the OSD main menu.
There are six top menus on the screen: PICTURE,
( CHANNEL menu can only be enabled in TV
source.)
3. Press ENTER
appear when the control is highlighted)
7. Press MENU to exit from the OSD menu.
ViewSonic Corporation
16
Confidential - Do Not Copy VT2730-1M