Epson Stylus Pro 4000 Field Repair Manual page 88

Stylus Pro 4000 Field Repair Guide
3. Insert the Cap Assembly part of the way, through the back of the Printer.
Slide the Cap and Pump
Assembly, part of the way in
4. Install the 4 Screws securing the Cap and Pump Assembly.
correctly seated to avoid carriage
Pump and Cap Installation
Feed the Tubes into the receptacle
errors.
2 Screws
Ensure that the Flushing
Box Screw Hole is correctly
aligned before tightening the
Assembly screws.
Printer Component, Software Item,
If the Ink Tubes
are not fully
inserted, the
Ink may bubble
back through
the cap.
Assist the Tubes
while sliding in the Assembly.
Ensure that the Assembly is
2 Screws
LCD Display, Printer Button
4/28/05
fully into the receptacle,
Page 88.