1000Mm Feed Adjustment - Epson Stylus Pro 4000 Field Repair Manual

Stylus Pro 4000 Field Repair Guide
1. Load 17" Enhanced Matte roll paper.
2. From the Adjustment Wizard

1000mm Feed Adjustment

1000mm Feed Adjustment
for the Pro 4000, select the
Printer Component, Software Item,
1000mm Feed Adjustment.
1. Click on the Print button.
2. The Printer will print the 1000mm alignment pattern
3. Align a 1000mm ruler with the center vertical hash
marks, and the leading edge horizontal line (see
the Red Line on the example graphic). The "0" end
of the 1000mm ruler should be touching, but not
covering the leading edge horizontal line.
4. Use a lens to align the 1000mm ruler exactly with
the horizontal and vertical lines.
5. Using a lens, measure the exact distance between
the 2 horizontal lines. Be as accurate as possible
6. Enter the value that was measured.
5. Click on the Write button.
6. Click the Finish button.
LCD Display, Printer Button
4/28/05
Page 137.