Subsidiary Settings; Mode Set - JVC SR-DVM70US Instructions Manual

Dvd / hdd & mini dv video recorder
Hide thumbs Also See for SR-DVM70US:
Table of Contents

Advertisement

SUBSIDIARY SETTINGS

70
EN

Mode Set

Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
HDD
ENTER
AUDIO
Various modes of this unit are categorized into menus nested in 2
levels shown in the following table. To change the settings of these
modes, find the desired mode in the menu (for details on each
menu, see pages 70 through 72), then follow the procedure below.
DVD VIDEO SET UP
HDD/DVD/DV SET UP
FUNCTION SET UP
INITIAL SET UP
The procedure below shows how to set the desired option of the
A2ND AUDIO RECORDB mode as an example.
1
Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2
Press SET UP to access the Main Menu screen.
3
Press D E to select AFUNCTION SET UPB, then press G.
4
Press D E to select AREC/
PLAY SET UPB, then press G.
5
Press F G to select A2ND
AUDIO RECORDB, then press
ENTER.
6
Press F G to select the
desired option, then press
ENTER.
7
Press SET UP to complete the
setting.
CABLE/DBS
TV
DVD
DVD
FGDE
SET UP
LANGUAGE SET (A pg. 20)
AUDIO OUTPUT (A pg. 70)
PARENTAL LOCK (A pg. 33)
DISC PLAY SET UP (A pg. 71)
HDD SET UP (A pg. 71)
DVD SET UP (A pg. 71)
DISC SET UP (A pg. 74, 75)
DV SET UP (A pg. 71)
REC/PLAY SET UP (A pg. 71)
DISPLAY SET (A pg. 72)
VIDEO IN/OUT (A pg. 23, 72)
TUNER SET (A pg. 22)
CLOCK SET (A pg. 21)
DVD VIDEO SET UP
HDD/DVD/DV SET UP
FUNCTION SET UP
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
XP MODE REC AUDIO
DOLBY DIGITAL
2ND AUDIO RECORD
OFF
JUMP TIME
15 MIN
SET UP
ENTER
SELECT WITH @
THEN PRESS [ENTER]
EXIT
SELECT
PRESS [SET UP] TO EXIT
* The boldface settings below indicate the settings at your purchase.
AUDIO OUTPUT
DIGITAL AUDIO OUT
8
PCM
/ PCM ONLY
Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUT] connector.
DOLBY DIGITAL/PCM
Select this when you connect the digital input connector of a
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital
Decoder.
STREAM/PCM
Select this when you connect the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
PCM ONLY
:
Select this when you connect the linear PCM digital input of
other audio equipment (amplifier, MD or DAT deck, etc.).
NOTES:
This setting also functions when HDD is active.
If you watch or play back a title which contains multiple audio
languages, select APCM ONLYB in advance and choose main or
sub audio with AUDIO.
ANALOG AUDIO OUT
8
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
STEREO
:
Select this when listening to conventional two-channel stereo
audio with the unit's [AUDIO OUTPUT] connectors connected
to a stereo amplifier/receiver or TV set, or in case you want to
record the audio from a DVD VIDEO disc to a Mini Disc, etc.
DOLBY SURROUND
Select this when listening to multichannel surround audio with
the unit's [AUDIO OUTPUT] connectors connected to an
amplifier/receiver with a built-in surround decoder or a surround
decoder.
D. RANGE CONTROL
8
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a program
encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
NORMAL
:
Normally select this setting to activate this function.
WIDE RANGE
Select this to deactivate this function when you enjoy wide
dynamic range program.
TV MODE
:
Select this when you hear the sound through the TV's
speaker(s).
NOTES:
This function has no effect on programs other than those
recorded in Dolby Digital format.
This function does not work when Simulated Surround Effect is
activated. (A pg. 31)
The effect of ANORMALB and AWIDE RANGEB may not be
different depending on discs.
INITIAL SET UP
OUTPUT LEVEL
8
You can lower the output level of analog audio to accommodate
the unit to the connected A/V equipment.
STANDARD
:
Normally select this setting.
LOW
:
The output level of analog audio is lowered.
DOLBY DIGITAL/PCM /
^
:
:
STEREO
^
/ DOLBY SURROUND
:
NORMAL
^
WIDE RANGE / TV MODE
/
:
STANDARD
/ LOW
^
STREAM/

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvm70us - dvdr / hddr

Table of Contents