Audio Level Options - JVC KT-SR2000 Instructions Manual

Edit Code
You can change the access code (default code—1111)
as you like.
1. Upon entering this mode, press the number keys
1 – 6 to enter the current access code (4-digit:
default code—1111).
The "New Code" screen appears.
2. Press the number keys 1 – 6 to enter your new
access code (4 digit).
The confirmation screen appears.
3. Press the number keys 1 – 6 to enter your new
access code (4 digit) again.
The access code is now changed.
Note:
Limit acceptable lock code digits to 1 – 6.
26

7 Audio Level Options

You can adjust the audio level and gain at the same
time when you feel that the sound through your JVC
PnP is too small or too loud.
Upon entering this mode, a horizontal bar graph is
displayed.
Press CAT 3 / 2 (or CAT + / –) to adjust the audio
level and gain, then press SEL (or SELECT).
• You can also use CH 5 / ∞ (or CH + / –) for
adjustment.