JVC KT-SR2000 Instructions Manual page 13

1 Main display
2
(POWER)
Turns on and off the power.
3 MEMO (memory) (S-SEEK)
Stores and recalls the Artist/Song Title
information.
4 BAND (P.TUNE)
Selects the 3 bands of stream presets; enters and
exits from the Preset Tuning Mode.
5 CH (channel) 5 / ∞ (CH + / –),
CAT (category) 2 / 3 (CAT – / +)
Navigate through streams, categories, and Menu
screens.
6 SEL (SELECT)
• On the menu and stream list screens: Selects an
item highlighted.
• On the Normal Operation or Preset Tuning Mode
screens: Only on the main unit—returns to the
previous stream if pressed and held. Also enables
access to streams directly by number keys.
7 DISP (display)
Changes text size of the artist name and song title
if pressed. Also alternates the Normal Operation
screen and the Stream List if pressed and held.
8 MENU
Enters and exits from the Menu Options settings.
9 Number keys 1 – 6 (0 – 9)
Enters the stream numbers (0 – 9) or preset
numbers (1 – 6) directly.
p DIRECT
Enables access to streams directly by number keys.
q MUTE
Mutes sounds.
w PREV (previous)
Returns to previous stream or previous status.
e Insulation sheet
When you use the remote controller for the first
time, pull out this sheet.
Replacing the battery in the Remote Controller
1. While pushing the lock lever (1),
Lithium coin battery
pull out the battery holder (2).
(CR2032)
2. Replace the new battery on the
battery holder with the + side
facing up.
1
3. Insert the battery holder back into
2
position.
13