Confirm Tone Options; Fm Transmitter Options - JVC KT-SR2000 Instructions Manual

Dimming Control: Press CH 5 / ∞ (or CH + / –) to
select either "Manual" or "Automatic", then press
SEL (or SELECT).
• Manual: A horizontal bar graph is displayed. Press
CAT 3 / 2 (or CAT + / –) to adjust the display
brightness manually, then press SEL (or SELECT).
(You can also use CH 5 / ∞ (or CH + / –) for
adjustment.)
• Automatic: The low dimming limit "L" and high
dimming limit "H" will always maintain a
minimum separation of the settings.
– Adjust the low dimming limit "L" and high
dimming limit "H" using CAT 3 / 2
(or CAT + / –).
– Toggle between "L" and "H" using CH 5 / ∞ (or
CH + / –).
– Confirm all settings using SEL (or SELECT).
Font Type: Press CH 5 / ∞ (or CH + / –) to select the
font type shown on the display, then press SEL (or
SELECT).
24

3 Confirm Tone Options

Press CH 5 / ∞ (or CH + / –) to select either "On" or
"Off", then press SEL (or SELECT).
• On: To activate the confirmation beep when you
press (POWER) or some operation buttons.
• Off: To deactivate the confirmation beep.

4 FM Transmitter Options

This option functions only when your JVC PnP is
connected to the Car Docking Kit KS-K6012.
The following settings are possible on this sub-menu
screen—"FM On/Off" and "Frequency selection".
FM On/Off: Press CH 5 / ∞ (or CH + / –) to select
either "On" or "Off", then press SEL (or SELECT).
• FM On: To activate the FM transmitter.
• FM Off: To deactivate the FM transmitter.
Note: It is recommended that you select "FM Off"
if you have connected your JVC PnP using a
audio cord or cassette adapter.
Frequency selection: Press CH 5 / ∞ (or CH + / –) to
select an available frequency for the FM transmitter.