When Using Propane - Sanyo SGP-EW120M2G2W Technical Data Manual

Gas heat pump air conditioner m2 w multi
Hide thumbs Also See for SGP-EW120M2G2W:
Table of Contents

Advertisement

Outdoor Unit

(5) When using Propane

* When using Propane as the gas fuel, it is necessary to adjust the fuel adjustment valve and the gas
type setting.
(1) Fuel valve setting
●With the power supply breaker for the outdoor unit
OFF
1) Move the lever of the P/N switch that is attached to the
mixer part of the engine to the position shown in the
diagram. Turn it 180 degrees in the clockwise direction
(there is a stopper provided). Do not apply unnecessary
force to turn it any further.
2)
the electrical equipment box, fix the "Gas type
In
setting/Adjustment
prescribed position for the PL NAME.
(2) Fuel Gas Type Setting
● Check that the fuel adjustment valve setting has
been set before operating the outdoor control board.
1) Press the home key (S004) for longer than one second and the menu item number will be displayed.
2) Next, press the up (S005)/down (S006) key to set the menu item number to
3) After displaying
(S007) key. The green LED (D053) lights up, and the system address setting is displayed.
(For example:
4) Next operate the down (S006)/up (S005) key, to display the gas type setting. When the gas
type setting is displayed, press the set (S007) key for longer than one second.
Note: When setting the gas type,
5) A red LED (D052) lights up, indicating that a forced setting is being carried out. In this condition, press
the down (S006)/up (S005) key, and select the gas type.
The relationship between display and gas type is as shown in the following table.
↑Up key
(S005)
↓Down key
(S006)
* When the H/L/E gas type is selected, the oil replacement time warning is not displayed.
6) After completing selection of gas type, press the set (S007) key for longer than 1 second. The red LED
(D052) will be extinguished.
7) Press the home (S004) key to complete the setting.
Note: When using propane, change the setting in accordance with the above procedure to
Completed"
label
,
is displayed. When
)
** is displayed.(for ** enter 00-05)
Display
(GAS 00)
(GAS 01)
(GAS 02)
(GAS 03)
(GAS 04)
(GAS 05)
(GAS 06)
(GAS 07)
(GAS 08)
(GAS 09)
(GAS 0A)
(GAS 0b)
(GAS 0C)
(GAS 0d)
(GAS 0E)
(GAS 0F)
B-3
1. Conditions for gas use
to
the
Propane
-
Natural gas G20
Natural gas G25
-
-
-
-
-
-
-
-
-
-
-
-
.
is displayed press the set
Gas type
G31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgp-ew150m2g2wSgp-ew190m2g2wSgp-ew240m2g2w

Table of Contents