GEM KMG Series Installation And Maintenance Manual page 9

5.6 • Remove all packing materials and peel away
the protective plastic film from all external
surfaces of the oven.
5.7 • For free-standing models, the appliance needs
to be levelled: small differences in level of the
supporting surface can be eliminated with the
adjustable feet (by screwing or unscrewing
them). A significantly uneven or sloping stance
can affect the operation of the oven adversely.
For models equipped with a pan trolley,
it is necessary to pay special attention when
levelling.
5.8 • Lining up the pan trolleys 20 x 1/1 GN and
20 x 2/1 GN. If the floor is not level, aremedy
must be found using an access rampwith a
maximum gradient of 4° (not included inthe
supply).
If there is an outlet grate in front of
theappliance, it is necessary to fit runners in
thepan trolley entry area.
5 • POSITIONING
9
90027360rev00
OK
OK
OK
OK
201 - 202
X = 200 mm
Y = 300 mm