Initial Settings; Language Setting; Setting Clock Semiautomatically - Semiauto Clock Set - JVC HR-J695U Instructions Manual

– Connections and Plug&Play Setting –
D
Perform Plug&Play setup
Plug the AC power cord into an AC outlet. Do not turn on the
VCR. The clock and tuner channels will be set automatically. The
time and date can be set automatically by the clock setting data
transmitted from one of the regular TV broadcast channels. We
call this TV channel the "host channel" and it is a PBS channel in
your area.
ATTENTION:
● If you use a cable box, Plug&Play will not function; set the
clock and tuner channels separately.
During Initial Auto Clock Set
"Aut" blinks.
During Auto Channel Set
The channel numbers are displayed as they are
scanned and set.
During VCR Channel Set
Channel No. "3" blinks.
A Press POWER to turn on the VCR.
B Press CH+/- on the Remote to select CH"3",
"4" or "–" (off), then press OK.
● Inserting a cassette during VCR channel
set will cause the VCR to turn on
automatically and VCR channel set fails.
So you have to perform VCR channel set
manually. Press STOP/EJECT button on the
VCR to eject the tape. Then, do step
2
in "Set VCR channel" below.
● If a cassette is already in during VCR
channel set and you press the STOP/EJECT
button on the VCR, the VCR will turn on,
eject the tape and turn off. In this case,
VCR channel set will continue. Perform
1
step
Plug&Play Completed
The received channel number is displayed.
To check the time, press the DISPLAY button or turn off the VCR.
What to do if Plug&Play setting failed
● If an incorrect time is displayed on the display panel, perform
the "Semiauto Clock Set" or "Manual Clock Set" procedure.
● If "–:– –" appears on the display panel, ensure that the antenna
cable is connected correctly. If Plug&Play setting is not
performed though the antenna cable is connected correctly,
perform "Manual Clock Set" and "Auto Channel Set" or
"Manual Channel Set".
Set VCR channel
The VCR channel is the channel on which you can watch the picture
from the VCR on the TV when only using the RF connection. To reset
the VCR channel, perform the following steps:
A Press POWER to turn off the VCR, then press STOP/EJECT
( ) on the VCR for more than 5 seconds. "CH3" appears
0
on the display panel.
B Press CH+/– on the Remote to select "CH3", "CH4" or "CH–"
(OFF), then press OK.
● The VCR channel is preset to "CH3". Set to "CH4" if "CH3" is
used for broadcasting in your area.
The VCR channel will be reset to "CH3" after a power failure
occurs.
E
Final preparation for use
Turn on the TV. Select the VCR channel 3 or 4 (or AV mode) on
the TV. You can now perform basic playback or basic recording.
● If you connect the TV and the VCR only using the RF
connection, press TV/VCR on the Remote so that the VCR mode
indicator lights on the display panel.
2
– above.

Initial Settings

Language Setting

The default setting is "ENGLISH".
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "INITIAL
SET", then press OK or
B
Select language
This VCR offers you the language choice to
view menus and some messages — in
English, Spanish or French. Press
move the highlight bar (arrow) to
"LANGUAGE", then press OK or
repeatedly until the desired language is
selected.
Press MENU to return to normal screen.
Language selection will be reset to "English" after a power
failure occurs.
1
Clock Setting
–
Perform clock setting only if the clock has not been set correctly
by the Plug&Play setting or if you use a cable box.
Preparations
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "INITIAL
SET", then press OK or
B
Access Clock Set screen
Press to move the highlight bar (arrow)
rt
to "CLOCK SET", then press OK or
Setting clock semiautomatically
— Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps 1 to 2 in
"Preparations" above, then go to the following steps.
NOTE:
● The time set previously will be erased when "AUTO CLOCK",
"HOST CH", "D.S.T." or "TIME ZONE" setting is changed.
A
Set Auto Clock to ON
Press OK or
e
to move the highlight bar to "AUTO
CLOCK", then press
selected.
B
Select host channel
You can either select "AUTO" or enter a PBS channel number.
Press OK or
e
press repeatedly until "AUTO" or the desired PBS channel
rt
number is selected.
to
rt
.
e
to
rt
e
to
rt
.
e
.
e
on the Remote repeatedly
so that "ON" is
rt
to move the highlight bar to "HOST CH", then
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
CLOCK SET
TIME DATE YEAR
1:00PM 12/24 02 TUE
AUTO CLOCK : ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END