Pioneer AVIC-Z2/XU/UC Service Manual page 232

5
- Removing the Monitor Assy
1
Remove the two screws. (Fig.2)
(2) Remove the screw to remove the Cover.
Do not pull the connecting flexible cable. (Fig.3)
(3) Remove the flexible cable from the connector to
remove the Monitor Assy. Push the lid of the con
up with the top of precision screwdriver (minus),
and then remove the flexible cable. Take much c
not to pull the connector forcedly or break it ope
because it is easy to be damaged. And also, use
precision screwdriver in the same way in the
installation. (Fig.3)
5
6
Monitor Assy
1
Assy
AVIC-Z1/UC
6
7
Fig.2
7
8
A
B
C
D
Cove
E
3
F
225
8