1
F.Bal (0)
: FBAL coefficient (layer 0)
F.Bal (1)
: FBAL coefficient (layer 1)
T.Gain (0)
: Tracking gain coefficient (layer 0)
A
T.Gain (1)
: Tracking gain coefficient (layer 1)
F.Gain (0)
: Focus gain coefficient (layer 0)
F.Gain (1)
: Focus gain coefficient (layer 1)
AS Normal (0) : AS normalization adjustment value (layer 0)
AS Normal (1) : AS normalization adjustment value (layer 1)
ErrorRate
: Error rate
[ Mecha ServiceTest - FE Test Track Jump - ] screen
B
C
[1] Track appointment
[2] Start Track Jump
¥ ¥ ¥
[ Mecha ServiceTest - FE Test ID Search - ] screen
D
[1] cursor right
Moves the cursor to the right.
¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥
[2] cursor left
Moves the cursor to the left.
¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥
[3] cursor up
Moves the cursor up.
¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥
[4] cursor down
Moves the cursor down.
¥ ¥ ¥ ¥ ¥ ¥
[5] Start ID search
Starts ID search (returns to [ Mecha ServiceTest - FE Test TrackingClose - ] screen).
¥ ¥ ¥
E
3. About EDC test
EDC-1 Mode : Implements EDC test successively.
EDC-2 Mode : Implements EDC test by the unit of blocks.
Operation procedure is similar for EDC-1 and EDC-2.
F
202
1
2
Specification of track number (Mecha switches the 7 (DVD type), 5 (CD type) pattern cyclically.)
¥ ¥ ¥
Starts tracking jump (returns to [ Mecha ServiceTest - FE Test Tracking Close - ] screen).
2
3
AVIC-Z1/UC
3
4
4