JVC TH-A75 Instructions Manual page 25

To select a particular title, chapter or track using number
buttons
Title on DVD :While stopped
Chapter on DVD :During playback
Track on VCD/SVCD :During playback with the PBC function
deactivated or while stopped
Track on Audio CD :During playback or while stopped
From the remote control ONLY: Press the number buttons.
• To select 3, press 3.
• To select 14, press +10 then 4.
• To select 24, press +10, +10, then 4.
• To select 40, press +10, +10, +10 then 10.
The selected title, chapter, or track number starts playing.
NOTE:
The number buttons may be also used to select an item on the menus
of DVD or of VCD/SVCD with PBC function.
About the indications on the display
While playing back a disc, the playback information
appears on the display.
Ex.: When playing back a DVD
Chapter no.
DIGITAL
SURROUND
Surround/DSP mode
Ex.: When playing back an Audio CD
Disc type
LINEAR PCM
Surround/DSP mode Track no.
NOTES:
• You can change the display pattern of time information. See
page 34.
• The current disc type information appears as follows:
– "VCD": shows a VCD or SVCD is loaded.
– "CD": shows an Audio CD is loaded.
* When a VCD or SVCD with PBC function is played, the time
information does not appear, but "PBC" appears.
** See page 30 for details.
Elapsed playing time
L C R
LFE S.WFR
LS RS
Currently activating speakers
and incoming signal**
Elapsed playing time*
L R
S.WFR
Currently activating
speakers and incoming
signal**
Resume playback function (see page 56):
If you turn off the power while playing back a disc, the
position where the playback has been stopped is stored.
The RESUME indicator lights up on the display when the
resume function is activated.
To resume playback from that position, press DVD or PLAY on
the remote control.
• The resume playback function does not work for Audio
CDs.
Preventing screen burn-out—screen saver function
A TV screen may be burned out if a static picture is displayed
for a long time. To prevent this, the system automatically dims
the screen if a static picture is displayed for over 5 minutes—
the screen saver function.
• Pressing any button will cancel the screen saver function.
• If you do not want to use the screen saver function, see
page 53.
21