Replacing A Front Turn Signal Light Bulb - Yamaha XVS95CTB Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
7
Replacing a front turn signal
light bulb
1. Remove the front turn signal light
1
outer lens by removing the screws.
1. Screw
2. Remove the inner lens by pulling it
out.
[ECA10681]
EAU42462
1. Outer lens
2. Inner lens
3. Turn signal light bulb
3. Remove the burnt-out bulb by
4. Insert a new bulb into the socket,
5. Place the inner lens in the original
7-31
3
2
pushing it in and turning it counter-
clockwise.
push it in, and then turn it clock-
wise until it stops.
position, and then install the outer
lens by installing the screws.
NOTICE: Do not overtighten the
screws, otherwise the lens may
break.
[ECA10681]
1