Rider Seat; Helmet Holder - Yamaha XVS95CTB Owner's Manual

Rider seat

To remove the rider seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2
1
1. Seat lock
2. Unlock.
2. Lift the front of the seat up, and
then pull the seat off.
To install the rider seat
1. Insert the projection on the rear of
the seat into the seat holder as
shown.
INSTRUMENT AND CONTROL FUNCTIONS
EAU42750
1
2
1. Projection
2. Seat holder
2. Push the front of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.

Helmet holder

1. Helmet holder
The helmet holder is located under the
rider seat.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See the
2. Hook the helmet onto the helmet
4-12
1
previous section "Rider seat".)
holder, and then securely install
the seat. WARNING! Never ride
with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an acci-
dent.
[EWA10161]
EAU14324
4