BOMBARDIER 650 Operator's Manual page 123

3 1
V04G02Z
1. Headlamp cover
2. Beam height adjustment
3. Beam side adjustment
Auxiliary Headlamp
CAUTION:
Never touch glass por-
tion of an halogen bulb with bare
fingers, it shortens its operating life.
If glass is touched, clean it with iso-
propyl alcohol which will not leave
a film on the bulb.
Insert a little flat screwdriver into the
slot at the bottom of the speedome-
ter. Slightly, pry the speedometer and
turn it clockwise then remove it from
steering pod.
V01A67Y
Unplug the auxiliary headlamp then
turn the socket counterclockwise to
unlock it. Pull the socket out of aux-
iliary headlamp housing and remove
bulb.
2
_____________________
Install a new bulb and the socket into
housing. It is important to place the
socket connector downwards.
Reinstall all removed parts.
Taillight
Unscrew lens screws to expose bulb.
2
V01L0HY
1. Lens
2. Screws
Push bulb in and hold while turning
counterclockwise to release.
Install the new bulb by first pushing in
while turning clockwise.
Indicator Light
Traxter 5 SPEED
If one LED is burnt in the indicator light
cluster, see an authorized Bombardier
ATV dealer for replacement of the light
cluster.
Speedometer
The speedometer is lighted with
LEDs. If one LED burns, replace
the speedometer. The LEDs are not
available separately.
1 2
123