Presetting The Radio Stations; Listening To The Radio - JVC LVT2099-029A Instructions Manual

Presetting the Radio Stations

You can preset 50 stations for FM and AM (MW).
Before tuning, make sure that you have turned down
the volume.
1. Press TUNER to select FM or AM (MW).
2. Press TUNING.(-/+) to choose the station.
3. Press ENTER to memorize or clear the station.

Listening to the Radio

Preset radio stations in the unit memory first see
"Presetting the radio stations".
1. Press TUNER to select FM or AM (MW).
The last received station is tuned in.
2. Press PRESET (-/+) repeatedly on the remote
control to select the preset station you want.
Each time you press the button, the unit tunes in
one preset station at a time.
3. Adjust the volume pressing VOLUME (-/+) on the
front panel or by pressing AUDIO VOL(-/+) on
the remote control repeatedly.
To turn off the radio
Press 1/' to turn the unit off.
To listen to non-preset radio stations
Use manual or automatic tuning in the step 2.
For manual tuning, press TUNING.(-/+)
repeatedly.
For automatic tuning, press and hold TUNING.
(-/+) for about two seconds.
38
To select a preset radio station directly
You can use the number buttons on the remote
control to select a preset radio station directly.
For example, to listen to the preset station 4, press
4 on the remote control. To listen to the preset
station 19, press 1 and then 9 (within 3 seconds).
For your reference
If an FM program is noisy
To appear "STEREO", press MO./ST. Then press
again this button to make "MONO" appear in the
display window. There will be no stereo effect, but
the reception will improve. Press the button again
to restore the stereo effect.
To improve reception
Reorient the supplied antennas.