Fuel Sub Level Sensor - Subaru 2009 IMPREZA Service Manual

Hide thumbs Also See for 2009 IMPREZA:

FUEL INJECTION (FUEL SYSTEMS)

26.Fuel Sub Level Sensor

Place "NO OPEN FLAMES" signs near the

working area.

• Be careful not to spill fuel.

• If the fuel gauge indicates that two thirds or

more of the fuel is remaining, be sure to drain

fuel before starting work to avoid the fuel to

1) Release the fuel pressure. <Ref. to FU(H4SO)-

52, RELEASING OF FUEL PRESSURE, PROCE-

DURE, Fuel.>

2) Drain fuel. <Ref. to FU(H4SO)-52, DRAINING

FUEL (WITH SUBARU SELECT MONITOR),

PROCEDURE, Fuel.>

3) Disconnect the ground cable from battery.

4) Remove the rear seat cushion. <Ref. to SE-11,

REMOVAL, Rear Seat.>

5) Remove the service hole cover.

Fuel Sub Level Sensor

6) Disconnect the connector from the fuel sub level

7) Disconnect the quick connector of fuel delivery

tube (A) and jet pump tube (B). <Ref. to FU(H4SO)-

76, REMOVAL, Fuel Delivery and Evaporation

8) Remove the rubber cap (C) from the nut.

9) Remove the bolts and nuts which hold fuel sub

level sensor to the fuel tank.

10) Remove the fuel sub level sensor.