Table of Contents
Advertisement
The number of the caller is not dis-
played although CLIP has been
set.
Calling Line Identification is not
enabled.
¤ The caller should ask the net-
work provider to enable Calling
Line Identification (CLI).
Refer to the notes on calling line dis-
play (¢ page 27).
You hear an error tone when key-
ing an input.
Action has failed/invalid input.
¤ Repeat the process.
Read the display and refer to the
user guide if necessary.
You cannot listen to messages on
the network mailbox.
Your PABX is set to pulse dialling.
¤ Set your PABX to tone dialling
(¢ page 50).
Gigaset E310A only:
No time is specified for a message
in the calls list.
Date/time have not been set.
¤ Set the date/time (¢ page 15).
The answering machine reports
"Incorrect PIN!" during remote
operation.
1.
You have entered the wrong sys-
tem PIN.
¤ Enter the system PIN again.
2.
The system PIN is still set to 0000.
¤ Set the system PIN to some-
thing other than 0000
(¢ page 49).
The answering machine will not
record any messages/cancels the
recording of a personal announce-
ment.
The memory is full.
¤ Delete old messages.
¤ Play back and delete new mes-
sages (¢ page 36).
The answering machine only
records part of a personal
announcement.
The announcement contained a
pause of more than 2 seconds.
¤ Avoid pausing when recording an
announcement (¢ page 34).
Exclusion of liability
Some displays may contain pixels
(picture elements) which remain
activated or deactivated. This is
completely normal and does not
indicate a fault.
Authorisation
This device is intended for analogue
phone lines in the UK and on the
Irish network.
Country-specific requirements have
been taken into consideration.
We, Gigaset Communications
GmbH, declare that this device
meets the essential requirements
and other relevant regulations laid
down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration
of Conformity is available at this
Internet address:
www.gigaset.com/docs
53
Advertisement
Table of Contents
