Tray Lock; Balance Setting - JVC GVT0155-001A Instructions Manual

           
When using the on-screen bar:
1
O N SCREEN twice.
    
 
      
  
      

 

    
2
Press Cursor
Press ENTER.
Dolby D
2/0 . 0ch
4
Press Cursor Y/5 repeatedly to select
"A-B".
5
Press ENTER at the beginning of the
part you want to repeat (point A).
Dolby D
2/0 . 0ch
6
Press ENTER at the end of the part you
want to repeat (point B).

    
    
   
 Press ON SCREEN.
 
      
  
         
To cancel
Select "OFF" in step 4, then press
NOTE
When playing back a DVD VIDEO, A-B Repeat Playback is possible
only within the same title.
• "A-B" cannot be selected during Program and Random Playback.
• "A-B" cannot be selected during playback with PBC function.

Tray lock

You can lock the tray and prohibit the unwanted disc ejection.
On the center unit ONLY:
While the system is on standby mode, press 0
held.
          
• The system turns on and "LOCKED" appears on the display
window.
• If you try to eject the disc, "LOCKED" appears to indicate that
the tray is locked.
       
Carry out the same operation again.
• The system turns on and "UNLOCKED" appears on the display
window.
/2 to highlight
.
  
7 pressed and

!  

Balance Setting

You can adjust the balance between the front left and front right
speakers.
.
  
                                          
• Before you start operation;
There is a time limit when doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.
1
S ETTING, with SHIFT pressed.
    
Example:
 Press Cursor
adjustment or selection.
 "  #   $
The adjustment display automatically disappears a few
seconds later with the current setting.

                       
B A L C T R
/  to make an
-- 5
B A L R