Setting Up Your Voicemail - Samsung SPH-m220 User Manual

5.
Press the navigation key down to highlight
press (left softkey) or press
Go
– or –
Press (right softkey)
Options
6. From the list of available area code prefixes, highlight
your desired code and press
press .
7. Confirm your selected area code is correct, highlight
and press (left softkey) or press
Go
confirm your selection against your available phone and
account information, and then provide you with a
confirmation screen.
8.
Review the information from the confirmation screen.
Write down the new number assigned to this phone.
Note the account passcode. You will need this code to
remotely access your account information.
If you did not receive a confirmation screen, repeat 1 - 7
or call your service provider for assistance.
9.
Press the navigation key down to highlight
press .
4 Section 1A. Setting Up Service
and then
Next
.
and press .
> Next
(left softkey) or
Go
Yes
. The system will
Finish and
Note No calls can be made until the phone is restarted after
setup.
Once your service has been activated, a new
Self-Service option is then available from within the
Menu > Tools menu.
Note
Navigating to Menu > Settings > Phone Information >
Phone Number reveals your Phone Number, MSID#, and
Data Username.

Setting Up Your Voicemail

All unanswered calls to your phone are automatically
transferred to your voicemail, even if your phone is in use or
turned off. Therefore, it is recommended that you set up your
voicemail and personal greeting as soon as your phone is
activated.
1.
From standby mode, press and hold .