Copy; Sort; 0/12 Volt - External Switching Voltage; Skew - Polarizer Adjustment - Grundig STR 400 AP Instruction Manual

The MODE Menu
¢
Use the MODE / buttons to select the individual set-
ting functions. Changing the settings in the respective mode
then is carried out with the
numeric buttons on the remote control handset.
¢
Repeated pressures on the
you to the menu options (functions) of the "Mode" menu.
These menu options are explained in the following.

COPY

With this menu function, you can copy all parameters belon-
ging to one programme position into another programme
position.
The data of the original programme position (source) is retai-
ned, the data of the "target" programme position is overwrit-
ten.
The display indicates, for example:
I99
COPYXXXX
Select the programme position into which you wish to copy
< / > buttons or with the numeric buttons
the data with the ¢
on the remote control handset. The programme position num-
ber flashes.
¢
Now, press the MEMORY button and copying is executed.
COPY for radio programmes
The copy function is especially useful for storing new radio
programmes (which are not yet preprogrammed) which are
broadcast on a sound subcarrier along with TV programmes.
To do this, first copy the corresponding TV programme posi-
tion into a free RADIO programme position.
Next, press the ¢ MODE
" C O P Y ".
¢
Next, press the RADIO button and select a free program-
< / > buttons or with the numeric or
¢
me position with the
programme select buttons
] |
handset. Press the ¢ MEMORY button to store this setting
in memory.
Then, use the ¢ AUDIO button to select MONO > < or STE-
REO and enter the desired sound carrier frequency with the
< / > buttons or the numeric buttons on the remote con-
¢
trol handset.
Conclude by storing the setting with the
For stereo reception, only the lower sound carrier for the left
channel is entered; the right channel is automatically stored
in memory.
< / > buttons or with the
¢
MODE / buttons will bring
o p ü +
TIMER
STEREO
SIGNAL IIIIIIIIIIIII
button; the display indicates
on the remote control
¢ MEMORY button.

SORT

" SORT " is indicated on the display. With this function, the
programme positions are exchanged.
Select the programme position you wish to exchange by
< / > buttons on the receiver or the numeric
¢
pressing the
or programme select buttons
handset. The programme position number will flash.
Pressing the ¢ MEMORY button executes the sort function
and the programme positions are exchanged.
By repeatedly applying the "SORT" function, the programme
positions can be brought into a new order.
0/12 VOLT – External Switching Voltage
" 0 VOLT " or " 12 VOLT " is indicated on the display.
< / > buttons, it is possible to select a program-
With the ¢
me-position-related switching voltage of 0 or 12 V. This swit-
ching voltage is available at the terminal strip
used for a variety of external applications (e.g., control of a
coaxial relay, multifeed system).
SKEW – Polarizer Adjustment
" SKEW " (polarizer) is indicated on the display.
< / > buttons, it is possible to set a numeric
With the ¢
value between – 99 and +128. This value range corresponds
to a constant current between approx. –70 mA and approx.
+90 mA for a magnetic polarizer.
Determine the optimum value and store it in memory by pres-
¢
sing the MEMORY button (see also section "Adapting the
Polarizer").
Along with this voltage, an impulse signal for a motor-driven
polarizer is available at the – I – I – POL. output of the 10-pole
connector strip. This is adjusted by means of the same com-
mands.
22
on the remote control
] |
wU
and can be