Goodman GMV8 Technical Information Manual page 10

PRODUCT DESIGN
Thermostats:
The following Amana ® brand Thermostats are suggested for use with the GMV8 Furnace Models:
Thermostat
1213411
1213407
1213406*
* For use in dual-fuel applications with a heat pump in a fossil fuel application. It is not for use with
the GMV8 as a sole heating source.
Filters:
Filters are required with this furnace and must be provided by the installer. The filters used must comply with UL900 or
CAN/ULCS111 standards. Installing this furnace without filters will void the unit warranty.
This furnace has provisions for the installation of return air filters at the side and/or bottom return. The furnace will
accommodate the following filter sizes depending on cabinet size:
Cabinet
Width
(in.)
All
Refer to Minimum Filter Area tables to determine filter area requirement. NOTE: Filters can also be installed elsewhere in
the duct system such as a central return.
10
Two-Stage Thermostat Description
Programmable Cool Heat
No
Yes
Yes
Upflow Filters
Side Return(s)
Approx.
Nominal
Flow Area
Filter Size
2
(in.)
(in )
16 x 25 x 1 400
MINIMUM FILTER SIZES
FURNACE INPUT
45M
70M
90M
115M
140M
45M
70M
90M
115M
140M
PERMANENT NOMINAL 600 F.M. FACE VELOCITY
DISPOSABLE NOMINAL 300 F.M. FACE VELOCITY
Hard Wired
2 2 Yes
1 2 Yes
2 3 Yes
Bottom Return
Cabinet Nominal
Width Filter Size
(in.) (in.)
17-1/2 14 x 25 x 1
21 16 x 25 x 1
FILTER SIZE TYPE
2
permanent
160 in
2
permanent
241 in
2
permanent
320 in
2
permanent
400 in
2
permanent
370 in
2
disposable
320 in
2
disposable
483 in
2
disposable
640 in
2
disposable
800 in
2
disposable
738 in
Battery Powered
Yes
Yes
No
Approx.
Flow Area
2
(in )
288
480