Warning Indications - JVC GR-DVL9000 Instructions Manual

Warning Indications

INDICATIONS
TAPE!
TAPE END
SET DATE/TIME!
ERROR!
REFER MANUAL
E01 — E07
Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator
blinks. When the battery power is exhausted, power turns off
automatically.
Appears when no tape is loaded, or when the erase
protection tab is set to "SAVE".
Appears if dirt is detected on the heads during recording. (
Appears if condensation occurs. When this indication is displayed,
the camcorder turns off automatically.
Appears for 10 seconds after power is turned on if there's no tape
loaded.
Appears when the tape ends during recording
or playback.
Appears when the date/time is not set.
Appears when the built-in rechargeable battery is
discharged and the previously set date/time is erased.
Appears when Audio Dubbing is unavailable.
Appears when Insert Editing is unavailable.
The error indications (E01 — E07) show what type of malfunction has
occured. When an error indication appears, the camcorder turns off
automatically. Press the reset button after removing the power supply
(battery, etc.), and wait a few minutes for the indication to clear.
When it does, you can resume using the camcorder. If the indication
remains, consult your nearest JVC dealer.
FUNCTION
83
EN
( pg. 14)
pg. 85)
( pg. 24)
( pg. 13)
( pg. 13)
( pg. 70)
( pg. 71)
( pg. 76)