Warning Indications - JVC GZ-HM200 U Instructions Manual

Hd memory camera
Hide thumbs Also See for GZ-HM200 U:
Table of Contents

Advertisement

Troubleshooting
Trouble
Cannot upload the fi le
to YouTube™
Cannot export the fi le
®
to iTunes
To reset the camcorder when it does not operate normally
! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the
camcorder, then reattach it.
# Execute [FACTORY PRESET].

Warning Indications

Indication
SET DATE/TIME!
COMMUNICATING ERROR
CANNOT USE IN
VIDEO MODE
NOT FORMATTED
FORMAT ERROR!
DATA DELETION ERROR
MEMORY CARD ERROR!
CANNOT TAKE MORE STILL
IMAGES AT THE MOMENT
RECORDING CANCELLED
46
(Continued)
You need your YouTube™ account to upload fi les to YouTube™.
Create your account.
Refer to "Q&A", "Latest Information", "Download Information",
etc. in [Click for Latest Product Info] in the help of the provided
Everio MediaBrowser software.
Refer to "Q&A", "Latest Information", "Download Information",
etc. in [Click for Latest Product Info] in the help of the provided
Everio MediaBrowser software.
Set the clock. If the message still appears after setting the
clock, the battery for the clock has been depleted. Consult your
nearest JVC dealer.
Be sure to use JVC battery packs.
Replace the SD card. (Files recorded with other devices that
support AVCHD cannot be played back on this camcorder.)
Select [OK] and select [YES] to perform formatting.
Check the operating procedure, and perform once again.
Turn off the camcorder, and turn it on again.
Turn off the camcorder, and turn it on again.
Remove and re-insert the SD card. (MultiMediaCard cannot be
used.)
Remove any dirt from the SD card terminals.
Insert the SD card before switching the power on.
If the problem persists, back up all data, and then perform
formatting. All data is deleted.
Stop video recording, and then record a still image. (If an SD
card is removed or inserted during video recording, a still
image cannot be recorded.)
Insert a new or formatted SD card. Set [VIDEO SLOT
SELECTION] to different slot, then record to an SD card in
[SLOT A] or [SLOT B].
Turn off the camcorder and turn it on again.
Action
Action

Advertisement

Table of Contents
loading

Table of Contents