JVC GR-DVL9000 Instructions Manual page 79

1
Zoom switch or volume switch (VOL.)
( pg. 26, 52)
Adjusts zoom during recording or the sound
volume during playback.
2
Grip strap ( pg. 16)
3 Tally lamp
Lights during recording.
4
Remote sensor (
Receives the signal from the remote control.
When using the remote control, point it at the
remote sensor.
5
Lens cover
Opens when the viewfinder is pulled out or the
LCD monitor is opened fully.
6
Stereo microphone (
For use when recording or audio dubbing.
7
External microphone input connector
(MIC) (Stereo) (
An optional microphone can be connected.
8
JLIP (Joint Level Interface Protocol)
(DIGITAL STILL) output connector
( pg. 60)
Outputs the digital still image to a personal
computer.
9
EDIT jack ( pg. 65)
Using an editing cable, connect to the remote
control or VCR.
0
RESET button (
When a malfunction occurs, press this button
after removing the power supply (battery etc.).
Pressing this button also resets the date/time or
various settings.
!
Stop button (5) (
Stops playback of the tape.
@
Play/Pause button (6/4) (
Plays back or stops the tape temporarily.
#
Fast-Forward button (3) (
Fast-Forwards the tape.
$ Rewind button (2) (
Rewinds the tape.
pg. 54)
pg. 70)
pg. 70)
pg. 76)
pg. 52)
pg. 52)
pg. 52)
pg. 52)
%
Progressive Dial (PROGRESSIVE)
( pg. 30, 46)
Turn for Progressive Video Recording or Pro
Snapshot Recording.
^
Progressive Button (
When this button is pressed, the camcorder starts
Progressive Mode Recording (high resolution).
When pressed during playback, a playback
snapshot is taken.
&
OPEN/EJECT switch (
Slide the switch down when loading/unloading a
tape.
* Speaker ( pg. 52)
During playback, the sound can be heard.
( PUSH-OPEN button (
Press to open the LCD monitor.
)
Power dial ( pg. 20)
Turning the camcorder on/off, recording or
playback is possible.
q
MENU button (
Press this button to make the Menu appear.
ON/OFF button (
Press and hold this button for more than approx.
1 second to make the indications appear on the
LCD monitor or the viewfinder.
w Function Navigator Dial (Select Dial)
( pg. 24, 33)
Adjusts the brightness of the LCD monitor or
selects the Menu etc. Referred to in this manual
as "Select Dial".
e START/STOP button (
Starts recording or stops recording to make the
camcorder enter the record-standby mode.
r
Viewfinder ( pg. 17)
Pull out when recording.
79
EN
pg. 30, 46)
pg. 14)
pg. 14)
pg. 33)
pg. 24)
pg. 20)