To Charge The Interactive Pen - LG SA560 Owner's Manual

76
INTERACTIVE FUNCTION
(For SA565 only)

To Charge the Interactive Pen

To charge the battery, connect the interactive pen to the PC with the charging cable.
(Check that the PC is turned on before connection.)
The battery light stays on during charging and will turn off when charging is complete.
When charging is complete, disconnect the charging cable in order to use the pen. Alternatively,
use the interactive pen while connected by the charging cable if charging is not complete.
WARNING
y Do not replace or repair the battery yourself.
y To charge the interactive pen, use the charging cable provided to connect the pen
to USB port of the PC.
y Warning message (low battery)
- When the battery voltage is 3.6 V or
lower, the low battery warning message
is displayed. The interactive pen will
work for about 10 minute after this
message is displayed.
- The interactive pen may not work
when the battery level is 3.4 V or lower.
y When you use the pen for the first time,
charge the battery for at least 3 hours.
The fully charged battery lasts 20 hours
when it is continuously used, or four
weeks in standby mode.