Using The Keystone Function; Using The Input List - LG SA560 Owner's Manual

28
USING THE PROJECTOR

Using the Keystone Function

To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set up at a right
angle to the screen.
Because the Keystone function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
•Keystone 0
-
CLOSE
1
Press the KEY.S ꔌ or KEY.S ꔍ but-
ton to adjust the picture.
y Keystone can be adjusted
from -40 to 40.
2
Press the OK button when done.

Using the Input List

Using the Input List
1
+
2
Adding Input Label
Displays which devices are connected to
which input ports.
1
2
3
4
Press the INPUT button to display the
input selection screen.
- The connected input mode appears
first.
Input List
Select an input device to view.
AV
Component RGB-PC 1 RGB-PC 2
Select an input signal using the
remote control's INPUT button to
connect the projector to the desired
input. You can use the
button to switch between all the input
modes.
Input List
Select an input
Input Label
AV Component RGB-PC1
Select a device to change name.
Close
Press the INPUT button to display the
input selection screen.
Press the red button.
Press the or button to go to the
desired input and press the OK button.
User the , , or
select a device name.
HDMI
Change Device Name
or
RGB-PC2 HDMI
Change Device Name
button to