Table of Contents
Advertisement
OPTION Settings
1
Press the MENU button.
2
Use the
,
,
and press the OK button.
3
Use the
,
,
desired item and press the OK button.
- To return to the previous menu, press
the ꕣ button.
The available option settings are described below.
Item
Language
Selects the desired language.
Caption
If the language for the AV input is set to Korean, captions can be
turned on or off.
Set ID
Sets the unique number of a projector when it is being remotely
controlled by PC.
PJT Mode
Turns the projected image upside down or flips it horizontally.
Keystone
Compensates for the trapezoidal image shape created when projecting
an image from an angle not perpendicular to the screen.
Blank Image Selects the background for blank image.
Auto Power Makes the projector turn on automatically when the power cord is con-
nected.
Item
On
Off
Interactive
Sets the Interactive mode. (For SA565)
Operate only in RGB/HDMI input mode.
y
Only Full Screen, 16:9 and 4:3 are available for Aspect Ratio when
y
the Interactive function is enabled.
If you enable the Interactive function when Aspect Ratio is set to
y
either Just Scan, Set By Program, Zoom or Cinema Zoom, Aspect
Ratio will be changed to Full Screen.
High
If the projector is used at an altitude higher than 1,200 meters, turn this
Altitude
option on. When High Altitude is not enabled, the projector may over-
heat or its protection function may be activated. If this happens, turn
the projector off and then on again after waiting for several minutes.
or
button to select OPTION
or
button to set up the
When the power cord is connected to the projector, it turns
on automatically.
When the power cord is connected to the projector, it goes
into standby mode.
CUSTOMIZING SETTINGS
OPTION
• Language
• Caption
• Set ID
• PJT Mode
• KeyStone
• Blank Image
• Auto Power
?
Description
61
︿
: Off
: 1
: Front
1
-
+
: Blue
: Off
﹀
Advertisement
Table of Contents
