To Use The Intel(R) Widi Function - LG SA560 Owner's Manual

34
ENTERTAINMENT
To use the Intel(R)
WiDi function
You can view the screen of a device
with Intel(R) WiDi technologies on
your projector. Contact the device
manufacturer to find out if the device
supports this function.
Press the MENU button on the
y
remote control. Select NETWORK →
Intel(R) WiDi.
1
Set Intel(R) WiDi to On. (If you do
not use it, please change it to Off.)
2
Enable the Intel(R) WiDi settings on
the device that you want to connect
to.
3
A list of devices that can be
connected to the projector is
displayed.
4
Select a device to connect.
5
Select Yes, when the connection
request message appears.
6
If the device that you want to connect
accepts the request, Intel(R) WiDi is
connected.
When Wi-Fi Direct is set to Off, if you
y
set Intel(R) WiDi to On, Wi-Fi Direct
is automatically set to On.
When you set the Intel(R) WiDi
y
function to Off, Wi-Fi Direct returns
to the previous setting.
NOTE
It is recommended to connect a
y
laptop using Intel(R) WiDi within
close range.
Though Intel(R) WiDi can be
y
connected without a wireless router,
it is recommended to connect the
wireless router first for optimal
performance.
You may not connect your projector
y
to a non-LG Electronics device even
when it is detected.
It is recommended you to connect a
y
device to a 5 GHz router.
The response rate may vary
y
depending on the user's environment.
For more information on the device
y
you want to connect to, refer to its
owner's manual.