TRENDnet TW100-S4W1CA Quick Installation Manual page 9

12. After your system reboots, click Start; click on Run. Then type winipcfg in
the field and click OK.
13. The IP configuration box will appear. Choose your Network adapter from
the dropdown box (such as TRENDnet TE100-PCIWN 10/100Mbps network
adapter)and the current IP address information of your computer will show
in the box, including the following: IP Address, Subnet Mask and Default
Gateway.
14. If your IP Address shows the following information, your computer is now
successfully connected to the router:
IP Address: 192.168.1.x
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
NOTE: If the information shown is incorrect, please reboot and retry the
steps above.
7
English