TRENDnet TW100-S4W1CA Quick Installation Manual page 11

Dsl/cable broadband router with 4-port switch

Hide thumbs Also See for TW100-S4W1CA:

Table of Contents

Available languages

6. Click OK.

7. Click Close on the Local Area Connection Properties box.

8. Click on Start; click on Run. Then type cmd and click OK.

9. The Command Prompt window will appear. Type ipconfig at the C:\ prompt

and press the Enter key.

10. If your IP Address shows the following information your computer is now

successfully connected to the router:

IP Address: 192.168.1.x

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.1.1

NOTE: If the information shown is incorrect, please reboot the computer

and retry the steps above.

English

Table of Contents