4. Copying
When the document is set in the paper tray, does
the Document Sensor (PS1) turn ON ?
The motor rotates cw and the document is pre-fed.
Press the start key.
The motor rotates cw and the Read Position
Sensor (PS2) is ON.
The motor rotates ccw and the
CAM is set to the Copy mode (C).
The motor rotates ccw and the document data is
scanned by the Image Sensor and the recording paper is
printed until the Read Position Sensor (PS2) turns OFF.
The motor rotates ccw and the
CAM is set to the Receive mode (B).
The motor rotates cw and the recording
paper is ejected.
The motor rotates cw and the CAM is set to the
Transmit mode (A).
The motor rotates ccw and the document
is ejected.
YES
END
- 129 -
NO
See 3-11. Sensor Section (page 77.)
KX-FT21LA