Panasonic KX-FT21BX Service Manual page 111

4-4. SERVICE FUNCTION TABLE
Code Function
501 Setting the pause time
Setting the flash recall
502
time
Setting the pulse dial
503
speed
Setting the CED
520
frequency
Setting the international
521
line mode
Setting the return to
522
default mode
Setting the reception
523
equalizer
Setting the sending
524
equalizer
Selecting the document
544
feed position
550 Memory clear
ROM version and sum check
551
Setting the FAX monitor
553
function
554 Modem test
555 Scanner test
556 Motor test
557 LED test
558 LCD test
Setting the document
559
jam detection
561 KEY test
570 Setting the % break
Setting the number of
571 times that ITS is
redialed
Setting the ITS redial
572
interval
Setting of number of
time that
573
REMOTE TURN ON
BELL sound
Setting the number of
590
FAX redial times
Set Value Effective Range
001~600
001~600 X 100 msec
01~99 X 10 msec 01~99
1:10pps
1, 2
2:20pps
1:2100Hz
1, 2
2:1100Hz
1:ON 2:OFF 1, 2
1:ON 2:OFF 1, 2
1:ON
1, 2
2:OFF
1:ON
1, 2
2:OFF
01~99 step 00~99
1: OFF 2:PHASE
1, 2, 3
B 3:ALL
1:ON 2:OFF 1, 2
1:61%
1, 2
2:67%
00~99 00~99
001~999 sec 001~999
01~99 01~99
00~99 00~99
Default
Selects the pause time in 100 msec
05000 msec
steps.
Selects the line break time during
700 msec
flashing in 10 msec steps.
10 pps Sets the pulse dial speed.
When international communications
2100 Hz cannot be performed smoothly, select
1100 Hz.
Selects the international line mode
ON
during FAX communication.
Sets the resolution and contrast
ON conditions for FAX or copy to the
default settings.
When the telephone station is far from
OFF the unit or sending cannot be
performed correctly, set to "ON".
When the telephone station is far from
OFF the unit or sending cannot be
performed correctly, set to "ON".
When the ADF function is incorrect,
----- adjust the feed position. (8 step =
1mm)
Press "START/COPY/SET".
Press "START/COPY/SET".
Sets whether to monitor the line
OFF signal with the unit's speaker during
FAX communication or not.
Press "START".
Press "START".
Press "START".
Press "START".
Press "START".
ON
See page 23.
Press any key.
61% Sets the % break of pulse dialing.
Selects the number of times that ITS
14 times
is redialed (not including the first dial).
030 sec Sets the interval of ITS redialing.
Sets the number of times that the unit
15 times starts to receive a document in the
TEL mode.
Selects the number of redial times
5 times during FAX communication (not
including the first dial).
- 85 -
KX-FT21LA
Remarks