Fast Ethernet Ports - Nortel Application Switch Installation Manual

14

Fast Ethernet Ports

The RJ-45 jack is used for connecting 10/100 Mbps Ethernet segments to the port. The ports are
auto-sensing, auto-negotiating, and support half or full-duplex operation.
SFP GBIC Ports
Figure 8 illustrates the LC jack connector and Small Form Factor Pluggable (SFP) GBIC that fits
into the port socket.
Figure 8 SFP GBIC Port Socket and LC Connector
The LC jack is used for connecting Gigabit Ethernet fiber optic segments. The SFP modules are
not shipped with the product. SFP modules can be ordered from Nortel.
Note: Application Switches support only LC connectors with the SPF GBICs. Do not use
SPF GBICs with MT-RJ connectors.
Note: SFPs are not included and must be purchased separately.
1
315396-F