Connecting Bluetooth Devices; Taskbar Connection Indicator; Led Connection Indicator - Honeywell MX8 User Manual

Microsoft windows mobile 6.5 operating system
Hide thumbs Also See for MX8:
Table of Contents

Advertisement

Connecting Bluetooth Devices

Before connecting to Bluetooth Devices:
The system administrator has discovered, paired, connected and disconnected (using LXEZ Pairing Control Panel)
l
Bluetooth devices for each MX9.
The system administrator has enabled and disabled LXEZ Pairing parameters for the MX9.
l
The system administrator has also assigned a Computer Friendly Name using LXEZ Pairing Control Panel for the MX9.
l
To connect Bluetooth devices, the MX9 should be as close as possible and in direct line of sight (distances up to 32.8 feet or 10
meters) with the targeted Bluetooth device during the discovery and pairing process.
If the devices are in Suspend, tap the power key to wake the MX9.
Using the correct procedure, wake the targeted Bluetooth device if necessary.
There may be audible or visual signals as both devices discover and pair with each other.

Taskbar Connection Indicator

MX9 is connected to one or more of the targeted Bluetooth device(s).
MX9 is not connected to any Bluetooth device.
MX9 is ready to connect with any Bluetooth device.
MX9 is out of range of all paired Bluetooth device(s). Connection is inactive.

LED Connection Indicator

When the Bluetooth LED on the MX9 is off, Bluetooth hardware has been turned off or it does not exist in the MX9.
When the Bluetooth LED on the MX9 is on:
the MX9 is paired with another Bluetooth device but is out of range or not connected, or
l
is paired and connected to another Bluetooth device, or
l
is discovering other Bluetooth devices.
l
The Bluetooth LED
Blinks slowly (Bluetooth LED is on for one second, off for five seconds) when it is idle.
l
Blinks quickly (Bluetooth LED is on for 1/4 second, off for 2 seconds when the MX9 is discovering other Bluetooth
l
devices.
And blinks normally (Bluetooth LED is on for 1/2 second, off for 1/2 second) when it is connected.
l
There may be audible or visual signals from paired devices as they move back into range and re-connect with the Bluetooth
hardware in the MX9.
2-16

Advertisement

Table of Contents
loading

Table of Contents